Precision casting processing is an essential product for chemical production. It has corrosion resistance and high temperature resistance. The performance value of chemical companies is as high as pro. But a reasonable choice will have greater benefits for the user. Precautions for precision casting processing, and the choice of unreasonable causes of waste and danger.

1, according to the requirements of the media, you need to choose stainless steel, if the media is not very clear, the best reference industry is to use precision casting materials to choose their own materials. If material selection is possible, corrosion and cracking may occur during use.

2, the reactor is selected according to its own use pressure, some customers are insurance, the pressure is increased, I don't know that this has caused waste, the pressure is too high, the cost of manufacturing the reactor will increase, and various parameters are also required to be particularly high, which will definitely cause investors Investment costs.

3, then the temperature requirement, the reactor must determine the pressure parameters according to the temperature conditions of use, and then calculate the pressure vessel parameters.

4. Finally, according to the material properties, the transport, reactor, especially the viscosity and stirring speed of the material, and the stirring form are selected. Reasonable selection of reactors will have a significant impact on production time, which will affect the quality of the product and can be said to cause waste.

What should be paid attention to during the use and maintenance of precision casting?

Stainless steel reactor maintenance problems, please note the following:

1, we must always pay attention to the work of the entire equipment and reducer;

2, electric heating oil is changed every six months;

3, the reducer lubricant should be added immediately;

4, should check the position of the upper part of the safety valve, pressure gauge, thermometer, distillation hole, electric bar, electrical instrument, etc. at the time. If there is a fault, exchange or repair immediately.

5, the equipment is not used, must be thoroughly cleaned inside and outside the container, often scrub the pot body, keep the appearance clean and lining, to achieve the purpose of durability.

Precautions for precision casting processing

1, must be used before closing the refrigerant inlet valve;

2, start the stirrer, then enter the material, then open the steam valve and power supply;

3. To reach the required temperature, first turn off the steam valve and power supply, and then turn off the mixer after 2~3 minutes;

4. After the processing is finished, put the lid and the jacket on the remaining condensed water, rinse it with warm water as soon as possible, and then wash it thoroughly on the container wall with alkaline water of 40~500 °C to achieve the endurance of the purpose. Special pots are free of material (heat absorbing medium) empty tank casing, and steam valves and power sources must not be opened.

5, pay special attention to the use of steam pressure, not to exceed the fixed working pressure.

In order to better integrate and develop the strength of the company, the company will continue to serve customers in accordance with the laws of the market and advanced scientific marketing concepts.